alu lanka (pvt)ltd. in Kandy

Other image wedabima.com_XXkKWqf8PUwF4PH4CnIMloxqxTXpkLIZloAp7fhK.jpeg

Other image wedabima.com_g88TNbmFWgyWJsQ1bFFMnbUk27ci4N74pd2ziPjv.jpeg

Other image wedabima.com_TSIDmvJkCxU0bucV3Rd1NlcpzFZxdO9WtBzHO8Vf.jpeg

alu lanka (pvt)ltd. in Kandy

Store | VERIFIED

ALU LANKA (PVT)LTD.

Call

0777687422 / 0117467671 / 0117467672

Location

No 247 , Bollaththa , Ganemulla , Colombo

Description

alu lanka (pvt)ltd. in Kandy

Alulanka (Pvt) Ltd

In the field architectural fitting for aluminium and glass, the building finishes, both high quality and design flexibility are essential criteria together with installation, safety, reliability and durability.
If you are looking for high quality Building Finishes Alulanka (Pvt) Ltd. is your best choice.We fabricate, manufacture and install a wide range of products and specialize in custom-made manufacture and professional installation of Aluminium Doors & Windows, All kind of: Tempered Glass, Partitions, Wall Cladding, Curtain Walls, Ceilings, Aluminum Pantry, interior, Shower cubical, mirrors & Canopy.

ඇලුමිනියම් සහ වීදුරු සඳහා ක්ෂේත්‍ර වාස්තු විද්‍යාත්මක සවි කිරීමේදී, ගොඩනැගිලි නිමාව, උසස් තත්ත්වයේ සහ සැලසුම් නම්‍යශීලී බව යන දෙකම ස්ථාපනය, ආරක්ෂාව, විශ්වසනීයත්වය සහ කල්පැවැත්ම සමඟ අත්‍යවශ්‍ය නිර්ණායක වේ.ඔබ උසස් තත්ත්වයේ ගොඩනැගිලි නිමාවක් සොයන්නේ නම් Alulanka (Pvt) Ltd ඔබේ හොඳම තේරීම වේ.අපි පුළුල් පරාසයක නිෂ්පාදන නිපදවීම, නිෂ්පාදනය කිරීම සහ ස්ථාපනය කිරීම සහ අභිරුචි-සාදන ලද නිෂ්පාදනය සහ වෘත්තීය ස්ථාපනය සඳහා විශේෂීකරණය කරමු ඇලුමිනියම් දොරවල් සහ ජනෙල්, සියලු වර්ගවල: ටෙම්පර්ඩ් වීදුරු, කොටස්, බිත්ති ආවරණ, තිර බිත්ති, සිවිලිම්, ඇලුමිනියම් පැන්ට්රි

Aluminum powder coating is a process that applies a protective and decorative finish to aluminum surfaces. This coating is achieved through a dry powder, which is applied electrostatically and then cured under heat to form a durable layer. Here’s an in-depth look at aluminum powder coating process.

The Powder Coating Process

Surface Preparation:
- Cleaning: The aluminum surface is cleaned to remove any dirt, oil, or impurities. This can involve degreasing and etching.
- Pre-Treatment: The surface may be treated with a conversion coating or primer to enhance adhesion and corrosion resistance.
Application of Powder:
- Electrostatic Spraying: The powder coating is applied using an electrostatic spray gun. The powder particles are charged and adhere to the grounded aluminum surface.
- Fluidized Bed Coating: The aluminum part is heated and then dipped into a fluidized bed of powder, which melts and adheres to the surface.
Curing:
- Heating: The coated aluminum is placed in an oven where the powder melts, flows, and cures to form a uniform, solid layer.
- Temperature and Time: The specific curing temperature and time vary depending on the powder formulation but typically range from 160°C to 200°C (320°F to 392°F) for 10 to 20 minutes.

Advertisers are responsible for ensuring that advertising content, text, images, graphics ("Content") uploaded for inclusion on wedabima.com complies with all applicable laws. wedabima.com & D Factor Group assumes no responsibility for any illegality or any inaccuracy of the Content. wedabima.com and D Factor Group make no warranty or representation for any products, services, deals and transactions between the user and the advertisers. Users strictly at their own risk. The advertisers and user guarantees that his or her Content do not violate any copyright, intellectual property rights or other rights of any person or entity, and agrees to release wedabima.com and D Factor Group from all obligations, liabilities and claims arising in connection with the use of (or the inability to use) the service. Advertisers agree that their Content can may be presented through wedabima.com's partner sites under the same terms and conditions as on wedabima.com

wedabima.com and D Factor Group make no warranty or representation for any products, services, deals and transactions between the user and the advertisers. Users strictly at their own risk.

Related Items